This view uses a split display with a spectrum L(f) on top of a profile L(t) graph.

The active panel (chart) is of blue color while the other panel is grey. Tap on a panel to activate it.

There is a header line showing the report type (Source, Receiving or Background noise) and if available, the source position (#All, #A...#D).

The function name is supplemented with the corresponding colour, microphone position and the selected frequency band.

You are now looking at the spectrum of the selected microphone position (not the average!) from the previous view.

Use the cursor keys to select a different microphone position.

Use the cursor keys or tap a frequency band to get the values for the selected band.

Tap and drag vertically on the graph to change the visible range.

Press and hold anywhere on the graph to bring up the context menu or press the large ü button
Zoom (X-axis): X-axis zoom function
Range (Y-axis): Modifies the dB scale
Auto Range: Autscaling Y-Axis

The Profile chart is showing the Leq function versus time for the frequency band selected in the above spectrum graph.

Use the cursor keys to select a different microphone position.

Tap and drag vertically on the graph to change the visible range.

Press and hold anywhere on the graph to bring up the context menu or press the large ü button
Zoom (X-axis): X-axis zoom function
Range (Y-axis): Modifies the dB scale
Time Unit: Periods or relative time on the X-axis.

The Sum A value is calculated according to the 1/3 octave band spectrum and the frequency limitations. It is a post-processed value and not a measured value.

The cursor cannot be moved to the network band.

Tap to switch back to the Project overview
Project overview

Tap to toggle between the different data types (Reverberation, Receiving, Source, Background and Rating).

Exclude this measurement position from the average calculation.

Include a previously excluded measurement into the average calculation.

Press to toggle between single type frame and dual type frame.

Press to show info about the current measurement.

Press to show the next View
View 1

This button gives access to the memory menu.

- If the current project is not saved, you will be prompted to save the project with a new name.

- If the measurement is already saved, or no measurement is open, you will have a list of projects to select from.

To begin a new project, please press the X key on the keyboard.

Building Acoustics introduction

Building Acoustics theory

Getting started with Building Acosutics

Building Acoustics help index