This view uses a split display with a spectrum L(f) on top of a numerical table.
The active panel (chart) is of blue color while the other panel is grey. Tap on a panel to activate it.
There is a header line showing the report type (Source, Receiving or Background noise) and if available, the source position (#All, #A...#D).
The function name is supplemented with the corresponding colour and the selected frequency band.
You are now looking at the energetic averaged level spectrum.
Use the 
cursor keys or tap a frequency band to get the values for the selected band.
Tap and drag vertically on the graph to change the visible range.
Press and hold anywhere on the graph to bring up the context menu or press the large ü button
Zoom (X-axis): X-axis zoom function
Range (Y-axis): Modifies the dB scale
Auto Range: Autscaling Y-Axis
The table presents the numerical values from the spectrum graph above.
Each line consists of the frequency band (Frequency), the average value (Avg), the standard deviation (SD) and the number of positions included in the average value (N).
The Sum A value is calculated according to the 1/3 octave band spectrum and the frequency limitations. It is a post-processed value and not a measured value.
The cursor cannot be moved to the network band.
Tap to switch back to the Project overview
Project overview
Tap to toggle between the different data types (Reverberation, Receiving, Source, Background and Rating).
Tap to toggle between source positions (#All, #A...#D).
The displayed average value is based on the corresponding source position.
Press to toggle between spectrum and tabular view.
Note: It not only turns a graph into a table but it also changes the dual type frame into a single type (and vice versa).
Press to show info about the current measurement
Press to show the next View
View 2
This button gives access to the memory menu.
- If the current project is not saved, you will be prompted to save the project with a new name.
- If the measurement is already saved, or no measurement is open, you will have a list of projects to select from.
To begin a new project, please press the key on the keyboard.