This view uses a split display with a spectrum L(f) on top of a numerical table.
The active panel (chart) is of blue color while the other panel is grey. Tap on a panel to activate it.
There is a header line showing the selected standard, if available the source position and a possible warning message.
You are now looking at the calculated sound insulation spectrum.
Depending on the setup the reference curve(s) are displayed in red color.
The single number index is presented in big letters.
Tap and drag vertically on the graph to change the visible range.
Press and hold anywhere on the graph to bring up the context menu or press the large ü button
Zoom (X-axis): X-axis zoom function
Range (Y-axis): Modifies the dB scale
Auto Range: Autscaling Y-Axis
The table presents the numerical values from the spectrum graph above.
Each line consists of the frequency band (Frequency), index name (R', DnT, etc) and the unfavourable deviations (U.Dev).
At the end of the table, the single rating index and spectrum adaption terms can be found.
Tap to switch back to the Project overview
Project overview
Tap to toggle between the different data types (Reverberation, Receiving, Source, Background and Rating).
Tap to toggle between source positions (#A...#D).
The displayed rating result is based on the corresponding source position data.
Without an indicated source position the final averaged result is displayed.
Press to toggle between other calculated functions (D, R', DnT, etc).
Note: The last one selected will be remembered and used to start up with when entering the Rating View
Press to toggle between spectrum and tabular view.
Note: It not only turns a graph into a table but it also changes the dual type frame into a single type (and vice versa).
Press to show info about the current measurement or about the selected warning indicator
Project Warnings
Press to show the next View
View 2
This button gives access to the memory menu.
- If the current project is not saved, you will be prompted to save the project with a new name.
- If the measurement is already saved, or no measurement is open, you will have a list of projects to select from.
To begin a new project, please press the key on the keyboard.