Recorded measurements can be saved for further review on either the instrument or with Norsonic computer software.
Depending on the
Storage Mode settings this can be done manually or automatically.
All measurements will be stored on the SD card. It is recommended to use a Class 10 SD Card. You can create folders as you like.
The memory settings are available in the Memory menu, which can be reached by pushing the SETUP button.
In the default Manual Storage Mode, you can save the measurements by pressing the MEM button after completing the measurement.
If you press start without saving a measurement and the measurement is shorter than 30 seconds, it will be deleted automatically.
The Storage Mode settings are available in the Measurement Storage Mode menu, which can be reached by pushing the SETUP button.