Measurement display properties (like displayed functions, dynamic range and full scale) are
selectable directly in the measurement pictures.
The menu may have different option depending on graph.
If a command is gray it is not available for the moment.
Enable for live SPL data (Lf) in stopped if not measured.
Select functions to display. The Display Functions menu appear. Please note that you cannot select
to display a function that is not measured.
Select between Noise Rating(NR), Noise Criterion(NC) or Room Criterion(RC II) to
be displayed together with the Leq function.
Adjust (zoom in/out) on the X-axis.
Adjust displayed dB range from 20 to 160dB.
Select between the measurements Period number, the Absolute recording time and Relative recording time.
Start a playback of a recording or stop the ongoing playback. This item occurs only when
headset is set to playback, zoom level is set to 1:1 and cursor is positrioned on a recording marker.
Allows you to administrate (add, delete, move) user defined marker.
Turn on A-weighting on the frequency graph. The measurement data is not affected.
Toggles between showing measured values in dB Engeneering Unit.
Links cursors between the views. Free Cursor will disconnect the cursor handling in selected view.
from the other views.
When watching a stopped measurement you can go directly to a specific point. How to specifies follows
the Time Unit selected.
Select wich channel to use for displaying the FFT.
Enable/Disable the auditory correction for a STIPA Measurement.
Enable/Disable the background correction for a STIPA Measurement.
Gives you the possibility to type in or load a file for the background correction
spectrum.
button, then the available
pop-up menus and selections will be displayed.
