The Level View presents the energetic averaged Leq values and its included measurements.
The help content changes based on context. Tap the ? symbol to access help for a specific view or menu.
Building Acoustics help
Display Layout

This view uses a split display with a spectrum L(f) on top of a numerical table.

The active panel (chart) is of blue color while the other panel is grey. Tap on a panel to activate it.

There is a header line showing the report type (Source, Receiving or Background noise) and if available, the source position (#All, #A...#D).

The function name is supplemented with the corresponding colour and the selected frequency band.

Spectrum presentation

You are now looking at the energetic averaged level spectrum and its included measurement positions.

Use the Up Down cursor keys to scroll the measurements in the table below.

Use the Left Right cursor keys or tap a frequency band to get the values for the selected band.

Tap and drag vertically on the graph to change the visible range.

Press and hold anywhere on the graph to bring up the context menu or press the large ü button
Zoom (X-axis): X-axis zoom function
Range (Y-axis): Modifies the dB scale
Auto Range: Autscaling Y-Axis

Table presentation

The table presents the numerical values from the spectrum graph above.

Use the Left Right cursor keys to scroll the measurements in the table.

Each line consists of the frequency band (Frequency), the average value (Avg), the standard deviation (SD) and the number of positions included in the average value (N).

Network bands

The Sum A value is calculated according to the 1/3 octave band spectrum and the frequency limitations. It is a post-processed value and not a measured value.

The cursor cannot be moved to the network band.

Project
Project

Tap to switch back to the Project overview
Project overview

Report
Report

Tap to toggle between the different data types (Reverberation, Receiving, Source, Background and Rating).

Source position
#

Tap to toggle between source positions (#All, #A...#D).

Only measurements for the selected source position are displayed.

The displayed average value is based on the corresponding source position.

Tabular representation
TBL

Press to toggle between spectrum and tabular view.

Note: It not only turns a graph into a table but it also changes the dual type frame into a single type (and vice versa).

Measurement info
INFO

Press to show info about the current measurement or about the selected warning indicator
Project Warnings

Next View
VIEW

Press to show the next View
View 3

Saving a project
MEM

This button gives access to the memory menu.

- If the current project is not saved, you will be prompted to save the project with a new name.

- If the measurement is already saved, or no measurement is open, you will have a list of projects to select from.

To begin a new project, please press the X key on the keyboard.

Building Acoustics introduction

Building Acoustics theory

Getting started with Building Acosutics

Building Acoustics help index