Measurement display properties (like displayed functions, dynamic range and full scale) are selectable directly in the measurement pictures.
Hold your finger for a couple of seconds on the actual graph or tap the correct graph and press the Modify Display button, then the available pop-up menus and selections will be displayed.
Modify Display
The menu may have different option depending on graph.
If a command is gray it is not available for the moment.
Enable for live SPL data (Lf) in stopped if not measured.
Select functions to display. The Display Functions menu appear. Please note that you cannot select to display a function that is not measured.
Adjust (zoom in/out) on the X-axis.
Adjust displayed dB range from 20 to 160dB.
Select between the measurements Period number, the Absolute recording time and Relative recording time.
Start a playback of a recording or stop the ongoing playback. This item occurs only when headset is set to playback, zoom level is set to 1:1 and cursor is positrioned on a recording marker.
Allows you to administrate (add, delete, move) user defined marker.
Turn on A-weighting on the frequency graph. The measurement data is not affected.
Toggles between showing measured values in dB and Engeneering Unit. If the sensors in the two channels are of different kind, the option is not allowed.
Links cursors between the views. Free Cursor will disconnect the cursor handling in selected view. from the other views.
When watching a stopped measurement you can go directly to a specific point. How to specifies follows the Time Unit selected.
Select wich channel to use for displaying the FFT.
Enable/Disable the auditory correction for a STIPA Measurement.
Enable/Disable the background correction for a STIPA Measurement.
Gives you the possibility to type in or load a file for the background correction spectrum.