All segments witin a surfaces is draw graphically to ease navigation. Tap a surface to get more information, available in the top-right column of measurement data.
Toggles the function displayed for each segment. The color indicates the measurement function.
Double-tap a segment to step into the Segment result.
Show the Surface Scope in a tabular form.
Press to toggle between Simple View, Advanced View and Total Scope View. Simple and Advanced View provides the Surface result as a spectrum.
It is not necessary to double-tap a surface in order to start the measurement. When pressing Start, the selected surface will be measured.
Each segment has a coloured frame to indicate the measurement progress. A red frame means that the segment is not yet completely measured. A green frame indicated a fully measured surface.
If a segment is excluded, the surface is covered by a blue fill.
"H" and "V" will be shown to indicate if segment results exists for scanning direction Horizontal and Vertical, respectivly.
Tap and hold a surface to bring up the context menu:
Excludes the segment from the Surface measurement result.
Delete measurement data for the selected segment.
Press to show information about the current measurement.
This button gives access to the memory menu.
- If the current project is not saved, you will be prompted to save the project with a new name.
- If the measurement is already saved, or no measurement is open, you will have a list of projects to select from.
To begin a new project, please press the "X" key on the keyboard.
Setup NorRemote:
Enable NorRemote